Pu foam
The polyurethane foam series comprises a wide range of products for professionals as well as DIY use. PU foam products are designed for the installation of windows, door frames and other structural elements and for filling of structural openings.
Special types of polyurethane foam have certain considerably improved characteristics as adhesion to various construction materials, high expansion, hardness or conversely high flexibility. All the polyurethane products are the result of our own laboratory development.
Standard B3
Polyurethane foam designed for installations of door and window frames, filling of cavities, installation spaces between panels, bricked partitions, the ceiling and floor. It has excellent thermal insulation properties. It is applied with an attached tube. It is also suitable for DIY use.
Technical data sheet to downloadUniversal B3
The polyurethane foam is mainly suitable for filling of cavities, but also for DIY installations of door and window frames. The foam manifests very good adhesion to most construction materials. It is applied with an attached tube.
Technical data sheet to downloadWinter B3
Polyurethane foam with the possibility of all-year use for all common types of construction work, the same as in the case of the standard mounting foam B3. The foam is frost resistant, applicable down to -10°C (ambient temperatures); its advantage is quick hardening under unfavourable climatic conditions. It is applied with an attached tube.
Technical data sheet to downloadStandard B2
Polyurethane foam with increased fire resistance, complying with the requirements of the DIN4102 – B2 and ČSN EN 13501-1 standards. It is suitable for the installation of fire resistant frames and in cases its use is specified in the design documentation. It is applied with an attached tube.
Technical data sheet to downloadWater-well mounting B3
Polyurethane foam developed for sealing of water supply shafts, well centerings or wastewater lines under difficult conditions and in places with poor access. The special formula has been tested by an independent testing facility for direct and permanent contact with potable water. The certificate confirms that the product does not affect the quality of potable water. It is applied with an attached tube.
Technical data sheet to downloadLow-expansion mounting
Special polyurethane foam that is suitable for installation or gluing of elements. It can be applied in places where the lowest possible expansion of foam during the curing is required. It is also very suitable for gluing of interior and exterior sills, stair stringers or door frame casings in the interior. It is applied with an attached tube.
Technical data sheet to downloadHobby B3
The polyurethane foam is suitable for all common types of applications and uses, especially in the household. It features very good adhesion to all construction materials and thanks to optimum yield and expansion it is direcly designed for DIY applications as e.g. filling of cavities, additional gluing of EXP and XPS boards, installation of windows and door frames etc. It is applied with an attached tube.
Technical data sheet to downloadStandard B3
Polyurethane foam for professional use with excellent adhesion to most construction materials. The foam exhibits very good thermal-insulation and sound-insulation characteristics. It is suitable for the installation of window and door frames, sealing of openings in roof structures and insulating materials.
Technical data sheet to downloadUniversal B3
Polyurethane foam for professional use with excellent adhesion to most construction materials. It can be well further processed and it features a short curing time. It is suitable for professional filling of structural openings and cavities in construction.
Technical data sheet to downloadWinter B3
Polyurethane foam with the possibility of all-year use for all common types of construction work, the same as in the case of the standard assembly foam B3. The foam is frost resistant, applicable down to -10°C (ambient temperatures); its advantage is quick setting under unfavourable climatic conditions.
Technical data sheet to downloadStandard B2
Polyurethane foam with increased fire resistance, complying with the requirements of the DIN4102 – B2 and ČSN EN 13501-1 standards. It is suitable for the installation of fire resistant frames and in cases its use is specified in the design documentation. It is applied with an application gun.
Technical data sheet to downloadHigh expansion 65l B3
Polyurethane foam for professional use with excellent adhesion to most construction materials. The foam offers high expansion while having an even structure and it can be further processed after a short time (trimmed, plastered, repainted).
Technical data sheet to downloadHigh expansion 70l B3
Polyurethane foam for professional use with a very high yield of up to 70 l from a can, maintaining an even structure and other characteristics of other types of foam. Its characteristic feature is a short hardening time. It is suitable for the installation of door and window frames.
Technical data sheet to downloadWater well gun foam B3
Polyurethane foam developed directly for professional sealing of water supply shafts, well centerings or wastewater lines under difficult conditions and in places with poor access. The special formula has been tested by an independent testing facility for direct and permanent contact with potable water. The certificate confirms that the product does not affect the quality of potable water. It is applied with a professional gun.
Technical data sheet to downloadLow-expansion, gun-applied B3
Special polyurethane foam in a professional version that is suitable for installation or gluing of elements, or for applications where the lowest possible foam expansion during the curing is required. It is also very suitable for gluing of interior and exterior sills, stair stringers or door frame casings in the interior. It is applied with a professional gun.
Technical data sheet to downloadFast curing gun foam B3
Polyurethane foam meeting requirements for quick installation. It is a specially adapted recipe of gun-applied foam where the times of non-tackiness and possibility to cut foam strips after the application have been reduced. However, reduction of the curing time does not impair the foam structure in the cross section. It is applied with a professional gun.
Technical data sheet to downloadArctic B3
Unique polyurethane foam that is designed for high-quality application in cold months of the year. It can be used at ambient temperatures down to -16°C. As the only product of this type in the market it allows application with a subcooled can (down to -5°C). Its specific properties are mainly used during exterior construction work. It is suitable for all usual applications and construction materials. It is applied with a professional gun.
Technical data sheet to downloadBrick adhesive B3
High-quality polyurethane adhesive based on modified polyurethane, designed for gluing of masonry materials. It is characterised with a high yield and reduced post expansion. It is designed for gluing of supporting walls and partitions of various construction elements.
Technical data sheet to downloadPolystyrene adhesive B3
Highly stable polyurethane adhesive based of modified polyurethane, developed for fixing of polystyrene boards to various construction materials. It features high adhesion and minimum post expansion.
Technical data sheet to downloadGlue for roof tiles B3
It is an excellent polyurethane adhesive with extremely low later expansion that has been specially developed for the installation of roof tiles and repairs of roof shells. Its properties make it suitable for gluing of all types of roof tiles (burnt and made of concrete) as well as various construction or roofer materials (metal, shingles, bitumen, wood).
Technical data sheet to downloadStandard B2
Professional two-component polyurethane foam with high strength. It hardens during 30 minutes after application throughout its volume even without the access of air. It features a very high adhesive strength to various construction materials. Thanks to its composition it has a reduced flammability class and complies with the ČSN EN 13501-1 (DIN 4102) standards. After hardening it has a constant volume – it does not shrink nor perform post expansion. The product is designed for quick installation of window and door frames, filling of closed cavities and formation of thermally and sound insulating layers.
Technical data sheet to downloadStandard B3
Professional two-component high-strength polyurethane foam, quick hardening even without access of air humidity with very high adhesive strength. The foam can be trimmed by cutting 30 minutes after application when it has hardened throughout its volume. The foam offers very good binding capabilities and high adhesive force and strength. It is mainly suitable for quick installation of window and door frames and filling of closed cavities.
Technical data sheet to download
PU cleaner
The PU-foam cleaner is a mixture of organic solvents and a propulsion gas ensuring good solubility of both the input components and the partly hardened polyurethane foam.
The product in an aerosol package is designed for cleaning and maintenance of application guns and surfaces stained with polyurethane foam. After application of the spray adapter the PU-foam cleaner can be used to clean surfaces and other items stained with polyurethane foam that has not hardened yet.The PU-foam cleaner is an excellent agent for cleaning of the inside of application guns. Proper cleaning of the application gun optimises its functionality and extends its service life.
Industrial cleaners and lubricants
A wide range of cleaners based on organic solvents in an aerosol package as well as in non-pressurised packages – bottles, containers, drums. The properties and applications of the cleaners can be adapted to the customer’s requirements. Package types
Car cosmetics
In the range of cosmetic products for cars we are able to offer our customers a wide range of aerosol products: cockpit spray / window cleaner / upholstery cleaner / brake cleaner / lubricating oil / silicone oil / defrosting spray / lock releases / conservation oil etc. Besides the standard recipes we can also refill liquids supplied by the customer. Package types
You have not found your product? Write to us...
Our development laboratory has a number of our proprietary formulas from the series of technical aerosols (silicone, conservation, lubrication, universal and releasing oil...)
Contact